Indication Breathalyzer Mouthpieces with LED display red words
High accuracy breathalyzer Alcohol Tester Mouthpieces with 3 digits LED display red words
Respond time: Within 5 seconds
Operating temperature range: 5 ~ 40 oC
Detection range: 0.00% - 0.19% BAC / / 0.00-0.99mg/l
DC plug for automobile (optional)
Technical Data
Sensor type: MP-3 alcohol sensor
Detection Range: 0.00 1.00mg/L ;0.00 0.20%BAC
Alarming Level: 0.24mg/L (0.05%BAC, 0.50g/L;
0.50 BAC)
Accuracy: 5% F.S
Response Time: 5s
Warm-up Time: 20s
Resume Time: 20s
Working Voltage: DC3.0V 2 x AAA Batteries;
Working Current: 120mA
Working Environment: Temperature -10 ~50 Relative
Humidity 95% No Dewing
Display: 3 digits LED display with red words
Dimension: 110 x 150 x 18mm (L W H), 80g Battery
excluded
General Introduction
AT-S430 breath alcohol tester is kind of tester designed to measure concentration result of the breathed alcohol in the human body. This device adopts advanced MP-3 alcohol sensor which has excellent sensitivity and reproducibility, fashion and portable design make it more convenient for personal use. When the alcohol content exceeds the preset limited level, this device would send an audio and video warning to remind your safety.
Features:
1 Sensor: Advanced MEMS semiconductor alcohol
sensor--mp3 sensor
2 Red wine goblet-like design
3 Warm-up time: Within 18 seconds
4 Respond time: Within 5 seconds
5 Operating temperature range: 5 ~ 40 oC
6 Detection range: 0.00% - 0.19% BAC / / 0.00-0.99mg/l
7 DC plug for automobile (optional)
8 Black background for red test results display
9 Low battery indication
10 Six Mouthpieces w/ individual wrapped
11 Elegant portable bag
Operation Instruction
1. Slide down the battery cover on the back side, insert 2 pcs AAA 1.5V batteries according to battery polarity indication and close it. Or use DC plug to directly connect with vehicle to use.
2. Press the start button last for 2 sec, the tester would be on with a buzzer brief ringing, Warm-up of 20 sec begin, the fig on the screen count down from 20-0, please wait now. After the countdown, tester will send out a ring, and the ready light will be on. Now the test could begin.
3. Have a deep breath before testing, and blow directly to gas entry until a buzzer ringing, “000” twinkles for 4 seconds on the screen.
4. Tester will send out a ring after testing process finished, the LED screen would give the readout of temporal alcohol concentration (If the testing result is lower than preset level, the warning light will be off; If the testing result is higher than preset level, the buzzer ringing continuously, at the same time the warning light will be red), this result would be keep on the screen for 10 sec, then cut off the power supply automatically with two buzzer ringing.
5. If a new testing needed, press the Start button again and repeat the above step 2.2 2.4.
6. Press the model button to choose the unit of the result you want.
Packing details:
Portable bag
350gsm gift box
60pcs each carton
size:74*35.5*32cm
G.W.:13.8kg
Your message must be between 20-3,000 characters!
